Excellent street lights wholesale provider: The initial cost of an LED-type floodlight is higher, but it pays off early due to its> 90% electrical efficiency. Halogen lights offer more brightness than LED lights, but if we think of brightness in terms of lumens per watt of electricity consumed, LED flood lights are the clear winner. They come with metal heat sinks, which dissipate the very little heat generated during operation. It makes LED lights cooler to the human touch. Users prefer placing them in parking lots, sports fields, security fences, etc. Metal Halide – These are High-Intensity Discharge (HID) lamps. They consist of a mixture of mercury in gaseous form and metal halides (metal compounds formed with iodine or bromine). When an electric current is passed across the arc tube, gas is ionized, and as the temperature increases, the metal halides dissociate into metal atoms and halogen atoms. See even more information at CHZ Lighting.

Cities are turning smart with better control over roadway lighting, protecting the environment and human health. A decrease in energy consumption through intelligent control can involve proximity sensors, timers, and solar detectors. It enables the city administrations to install more street lights, thus improving safety and security. However, not all LEDs have regulation capabilities. The LED needs to be dimmable with the following features: It is a dimming functionality that requires a compatible LED driver. It regulates the brightness of the LED or turns it ON/OFF based on a control signal that works between 0 and 10V. If 0V is supplied, the LED turns OFF, whereas 10V means maximum brightness. It requires connecting an additional control circuit for brightness control.

Waterproof problems in the installation of LED street lights: After ensuring the quality of the lamp holder, you need to pay attention to the technical problems of the lamp holder installation and construction. Most of the led street light controllers are installed in the lampshade and battery box, and generally will not enter water, but in actual engineering cases, some are due to improper installation or The circuit board of the controller is not treated with three-proof paint, which will cause a short circuit due to rain water flowing into the led street light controller along the external wiring of the controller terminal. Therefore, during construction, attention should be paid to bending the internal connecting wires of the controller terminals into a “U” shape and fixing them, and the connecting wires exposed to the outside are also fixed to a “U” shape, so that rainwater cannot enter and cause the controller to short circuit. You can also apply waterproof glue on the inner and outer line interfaces to waterproof.

The fitness room uses 70 150W professional anti-glare LED lamps, which are directly replaced according to the original lighting method. The average illumination of the venue is above 300lx, and the uniformity is above 0.6, which exceeds the actual needs of customers. Compared with the original lighting scheme, the lighting quality of all venues has been comprehensively improved, the lighting is evenly distributed, there is no dark area, the vision is clear and bright, the performance of the lamps is stable, and the energy efficiency is higher, which not only ensures good lighting effects, but also meets the goals of energy saving and consumption reduction. . The new lighting environment will bring the school teachers and students a more invigorating sports enjoyment.

The LED tube uses a light-emitting diode as a light source, which has higher luminous efficiency, is more energy-saving, has a longer service life, and is more environmentally friendly. It is the ideal product to replace fluorescent tubes at this stage. The LED tube and the traditional fluorescent lamp are the same in the outer size. There are T5 tube, T8 tube and T10 tube. The length is 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m. The installation of the LED tube is very simple. When installing, the original fluorescent lamp is removed and replaced with the LED tube, and the ballast and the starter are removed, so that the 220V AC mains can be directly applied to the ends of the LED tube.

Shanghai CHZ Lighting practices the standardized production and carries out strict quality control to ensure the best quality of LED street lights etc, saving time and cost for both parties and bringing the greatest benefits to customers. Founded in 2010, Shanghai CHZ Lighting Co., Ltd. is a high tech enterprise engaged in the research; and development, production and sales of LED lighting products. CHZ lighting fixtures have obtained many international quality certificates, including ENEC+, TUV, ENEC, CB, ROHS, UL, DLC, etc.

Because the LED garden lamp has the characteristics of versatility, aesthetics, landscaping and decorating the outdoor environment, it is also called landscape LED garden lights. It has the characteristics of energy-saving and high efficiency. It is mainly used for lighting up the urban slow lanes, narrow lanes, residential quarters, tourist attractions, public places such as parks and plazas, which can extend the time people spend in outdoor activities and improve the safety of properties. Applicable occasions: Widely used in urban roads, parking lots, bicycle lanes, gardens, plazas, residential areas and other outdoor venues.

Features of CHZ outdoor LED street lighting: LED chip: Using PHILIPS chip, with high efficiency and long service life > 50000 hours. Driver: Using Meanwell or Inventronics driver, IP66 rated, high quality with improved performance. Power efficiency = 0.95. Color Temperature: LED street light provides a color temperature range of 3000, 4000, 5000, 5700, and 6500 Kelvin, excellent in improving the appearance of the building. Optics: Optical components reach IP66 protection standards. The LED optical system maximizes light to the target area for improved light uniformity. Find additional information at https://www.chz-lighting.com/.

Brightness: This is a measure of the magnitude of light produced by each lamp. There are street lamps that can deliver light to a circumference of up to 100m. Such light is critical in illuminating more oversized items that would otherwise be darkened at night. Most public spaces, such as open markets, depend on this brightness to continue transacting even at night. Most of these street lamps have an in-built photo sensor that ensures that the lamp is only on in low light conditions. In other words, the manufacturers of these lamps have been critical in ensuring that all the lamps operate only at night or in places where the lighting is poor. The LED lights do not function effectively during the day.

Top LED Roadway Lighting Technologies to Consider – After comparison of different types of lamps used in roadway lighting, we can safely state that LED is the way to the future. Therefore, LED lamps are best for roadway lighting. To fully understand LED technology, we must consider intricate details about LED roadway lighting before purchasing one. Roadway lighting is exposed to harsh conditions, including high wind, UV radiation, thunderstorms, high humidity, salt spray, vandalism, dust, and lightning strikes. LED roadway light manufacturers use various design features to counter these conditions. Let’s analyze what technologies make LED roadway lights tough and durable!