Top rated cylindrical roller bearing provider manufacturer: NA 48 Series – Needle roller bearings that have metric dimensions, with Inner Rings, with/without Seals, precision ground raceways with ribs, cage guided rollers, and ISO 48 Dimensional Series. NA 49 Series – Needle roller bearings that have metric dimensions, with Inner Rings, with/without Seals, precision ground raceways with ribs, cage guided rollers, and ISO 49 Dimensional Series. NA 69 Series – Needle roller bearings that have metric dimensions, with Inner Rings, with/without Seals, precision ground raceways with ribs, cage guided rollers, and ISO 69 Dimensional Series. Single row cylindrical roller bearings are also manufactured with snap ring grooves on the outer rings. This design simplifies the bearing joint as the bearings are located into the housing by means of the snap rings. The snap ring groove and snap rings are in accordance with IS0 464. There are different types designated NU, NJ, NUP, N, NF, RN for single-row bearings, NNU, NN for double-row bearings depending on the design or absence of side ribs, and SL series for four-row bearings. Our cylindrical bearing rollers come in the following series with various cage designs and Metric dimensions. Find additional info at cylindrical roller bearing manufacturers.

Its main features are low cross-section height and high load carrying capacity. Mainly used for bearing arrangements that are compact, inexpensive, and the bore of the bearing housing cannot be used as the raceway for the needle roller cage assembly. The bearing and bearing housing must be installed in an interference fit. If the axial positioning function such as the box shoulder and the stop ring can be omitted, the inner hole of the bearing housing can be made extremely simple and economical. The drawn cup needle roller bearings mounted on the shaft end are open on both sides and closed on one side. The base end face of the closed stamped outer ring can withstand small axial guiding forces.

These bearings are separable bearings, and convenient to be mounted and dismounted. They are designed as types of single, double and multiple rows among which the single row cylindrical roller bearings are most applicable. Normally these bearings can accommodate radial load only, none but single row bearings with ribs both on inner and outer rings can carry lighter constant axial load. Application – They are mainly used in large and medium-sized motors, rolling stock, machine tool spindles, internal combustion engines, generators, gas turbines, gearboxes, rolling mills, vibrating screens, lifting and transport machinery, etc. Cylindrical roller bearings are the right choice for high speeds and heavy radial loads. They are produced in different inner ring designs for easy dismounting.

In addition to the above-mentioned industries, in industrial motors, the bearings used are usually required to withstand heavy loads, and the bearing environment is relatively harsh. Bearings in motors such as household appliances such as air conditioners and washing machines have very strict requirements for low noise and high rotation accuracy. Jnsn bearing company is a professional best bearing manufacturer integrating bearing design, research and development, manufacturing, and trade. It can also provide ceramic, high-temperature, low-temperature, low-friction and other special-purpose types of bearings. The main products include best ball bearing, linear bearings, needle roller bearings, angular contact bearings, thin-walled bearings, tapered roller bearings, joint bearings, etc. See more details on https://www.jnsnbearing.com/.

F6000 series bearings are very similar to normal grooved ball bearings, and the only difference is that this type ball bearings have a flange on the outer ring, which can be very useful for mounting the bearings in through holes or axial location. Flanged deep groove ball bearings F6000 series are available in open, shielded and sealed options. The shields and sealed options provide protection to prevent debris and dust getting into the bearing, while at the same time retaining the grease to ensure good lubrication and a long service life. Metric sized deep groove radial flanged ball bearings can bear heavy radial loads and moderate thrust loads in both directions. These bearings are made to the same sizes as standard bearings 6000 series. They also have a flange, which allows flush fitting into housings up to the flange shoulder. This type of bearing is often used on steel tracks to act as both a guide and a support. Deep groove ball bearings are widely used bearings. They use uninterrupted raceways, making them an excellent choice for radial loads. This design achieves precise tolerances even at high speeds.

Our own manufacturing factory is specialized in producing deep groove ball bearings, self-aligning ball bearings, spherical roller bearings, single row tapered roller bearings, inch tapered bearings, automotive bearings, bearing joints, etc. The annual production capability is more than 960 million units. Why choose us? Our offers bridges your needs and our solution addresses your pain. Our products is able to achieve your desire result and performance. Our market positioning matches yours and our commitment resonates with you.

We have plenty available bearings for practically any running precision requirement and application speed: our bearings come in different Abec tolerance grades 1-9, internal clearances vary from C2 to C4, and several different cage designs including J-type, W-type, RJ-type, TW-type, and more. The deep groove bearing 6000 series can also be supplied with a full complement of balls as a filler notch design, which is with filling slots have a filling slot on the inner race as well as on the outer race, so that more and larger balls can be accommodated than with standard deep groove ball bearings. Its structure is simple, it consists of inner and outer rings with deep symmetrical ball race, separator and complement of balls, and it can be easy to operate. The big difference between the full complement style and standard deep groove ball bearing lies in the retainer, the former is without retainer in order to add more balls.

The deep groove ball bearings 6000NR series are equipped with groove and circlip in outer ring. The snap ring is made from a spring steel material and fits into an annular groove around the outside of the bearing which is offset to one side. And the snap ring groove can simplify arrangement design as the bearings can be axially located in the housing by a snap (or retaining) ring, saving space. These deep groove ball bearing types are available in open, shields or sealed option. The bearings are with metal shields or contact seals offering some protection against mechanical damage and serving to retain the lubricant in the sealed for life bearing. The deep groove ball bearings 6000NR series have low friction and are optimized for low noise and low vibration which enables high rotational speeds. They accommodate radial and axial loads in both directions, are easy to mount, and require less maintenance than other bearing types.