UPS battery factory 2023? Gel battery is a kind of lead-acid battery. It’s sulfuric acid mixed with gel, added into the battery and recharged for 48-72 hours. Therefore, it can better protect the positive and negative plates inside the battery from easily evaporating sulfuric acid, gel batteries are easier to adapt to high or low temperature conditions, and their life span is longer than that of lead-acid batteries. Our gel battery needs no water when it is used, because it is a maintenance-free valve-controlled sealed battery. See extra information on https://www.fsjuli.net/products-51371.
Foshan Juli New Energy Technology Co., Ltd. is a factory specializing in the production of lead-acid battery, Lead crystal battery, and gel battery, and providing design services for various battery application systems. We have two factories. The first factory produces batteries with a capacity of less than 17AH, and the second factory produces batteries with a capacity of more than 20AH. In addition to lead acid battery, our factory also produces gel battery, Lead crystal battery, front terminal battery, solar battery, UPS battery, RV battery, golf cart battery and OPZV&OPZS battery. Products include 2V, 4V, 6V,8V, 12V five series more than 1,000 capacity models, capacity from 0.5ah to 3000 AH.
The choice of battery is very critical, it is recommended that the smaller the number the better, for example, if you need two 12V100AH solar batteries used in parallel, it is recommended to use a 12V200AH. some batteries are not recommended to use in parallel, it is recommended to use in series because, in parallel, there will be a difference in voltage and internal resistance between each group of batteries, series use is balanced charging. In this way, reduce the failure rate of the battery, and improve the service life! Any battery and solar system questions, you can contact us to discuss!
Here is our automatic machine stacking workshop, which is more efficient and better quality than manual stacking, because the machine has high requirements for the plates and AGM spacers, which must be of the same thickness and same size, otherwise they will jam the machine. Therefore, the board sets stacked by the machine are very neat and the internal resistance and voltage of the produced cells are very consistent. Machine-wrapped pole plate will be stacked on the shelf, different models well marked, so that it is convenient to weld later when loaded into the corresponding pool shell. One by one, the pole groups are very neat and consistent.
After the color glue dries, we will quantitatively use the vacuum acid machine to add cold acid to the battery. If the customer needs a gel battery, we will mix the gel and acid first and then add it directly to the battery through the acid machine. For each battery, we have to set the acid pot, to prevent the charging process of less acid. Batteries are soaked in circulating water to cool down, connected to a computer-controlled charger, cycle charge, and discharged 48-72 hours to ensure that the battery is fully charged. Find extra info at https://www.fsjuli.net/.